The Most Cost Effective Upstream Spectrum Analyzer

The Nimble This® upstream spectrum analyzer is available on your PC, notebook or mobile phone.  We aren’t trying to sell you anything you don’t need.

With budgets always being tight why not use a proven field upstream spectrum analyzer that is cost effective and takes advantage of the equipment you already own.

My Nimble This® Android Mobile App. The SNR when I started was 35.8db so there was very little noise but I wanted to test the PNM software. I could barely see the noise at the Node with my current meter 860. I could not see it at all on the 1st dual amp out. Then I finally left the 860 in the truck and just used the cell phone. The Nimble This PNM Software gave pretty much the same results from the node through 5 dual amps and 1 line extender to the drop. The noise was from a loose F-Conn on the modem wall plate“.

upstream analyzer

Monitor every upstream port you have 24/7 without impacting the CMTS operation

Doesn’t require any headend cable or expensive hardware to monitor every CMTS upstream port you have

See ingress under the carrier without having to move the Cable Modem frequency causing a disruption

Upstream Spectrum Analyzer
See Ingress Under the DOCSIS Carrier. The only Spectrum Analyzer to do so. No need to move the CM to another frequency.
  • Monitor your Entire System 24/7.
  • No need to hook up Test Points, Splitters and Connectors. It’s connected all the time. Remotely link via your iPad or Android device. Save money on no extra man-hours maintaining physical test gear.
  • Look at ALL your customer data. Why only get to look at 2% of your data as the competitor does? Or only one CM MAC address.
  • Ingress Under the DOCSIS Carrier. The only Spectrum Analyzer to do so. No need to move the CM to another frequency to see what’s happening.
  • Supports DOCSIS D2.0, D3.0 and D3.1 – CISCOs CMTS’s and only ARRIS C4. The ARRIS E6000 is not DOCSIS 3.1 compliant.*

*Please note

*The ARRIS E6000 does not comply with the DOCSIS 3.1. spec – Section 9 of the DOCSIS 3.1 PHY specification, which includes upstream spectrum analysis for the E6000 D3.1 CMTS. ARRIS production software does not support the MIB’s with the exception of the software provided by ARRIS to Comcast only. If considering the E6000 please address this in advance with your sales rep.

*Update – CASA 10G CCAP CMTS – “7.1.3 release we will give the customer the option to turn on the 24 tap eq via CLI, they can also turn it off if modem issue arise”. Please contact CASA if you have any questions about this release.  If not release 7.1.3 – CASA is not maintaining coefficients for taps beyond 16. They state maintaining taps 17 through 24 does not improve performance on their system. This is DOCSIS 2, 3 and 3.1 non compliant.

  • Nimble This does monitor CPU utilization. We are cautious about all SNMP queries to the CMTS and ensure we do not impact the CMTS.
  • No CMTS Port Limits or Headend Real-Estate Required.
  • 100% Accurate, Not an Estimate as the competition.
  • 100% Accurate, Not an Estimate as the competition.
  • Does Not Interfere with CMTS.
  • Data Available Nationwide.
  • You already Invested in a Spectrum Analyzer. Your CMTS.
  • 100% Accurate, Not an Estimate as the competition.

Download your free app using the links below:

Download Nimble This PNM CM Installer from the iTunes Store Now!    Download Nimble This PNM CM Installer from the Play Store Now!